XINLI BOILER

Dec 27, 2021

During the operation of the biomass pellet boiler, the water entering the boiler needs to be treated to prevent boiler fouling and affect the thermal efficiency and service life of the biomass pellet boiler.

Dec 24, 2021

Introduction to basic common sense about biomass boilers: 1. The boiler uses the heat energy released after fuel combustion or the waste heat from industrial production to transfer to the water in the container, so that the water reaches the required temperature

Dec 23, 2021

At present, China has not formulated biomass fuel-fired boilers, kiln flue gas emission standards, and pollutant emission testing methods and standards. Therefore, it is unable to introduce incentive policies to encourage the promotion and application of biomass fuels.

Dec 22, 2021

The main technical characteristics of biomass (straw) boilers: 1. The boiler can completely achieve the purpose of low-temperature combustion, and the middle temperature separation is used to make the flue gas temperature of the entire circulating flow field of the boiler equal

Dec 21, 2021

1. Biomass pellet fuel has a large calorific value, the calorific value is about 3900-4800 kcal/kg, and the calorific value after carbonization is as high as 7000-8000 kcal/kg.

Dec 20, 2021

In the center of the boiler furnace, the temperature of the combustion flame center is between 1500 and 1700°C. Most of the ash in the fuel melts into a liquid or softened state at such a high temperature. Due to the heat absorption of the water wall, from the center of the combustion flame outwards, the closer to the water wall, the lower the temperature.