XINLI BOILER

Jan 05, 2022

Due to the wide variety of fuel in biomass power plants, after the fuel is burned in the furnace, it is very easy to coke and accumulate ash on the heating surface of the fuel furnace. This article will introduce you to the causes and treatment methods of coking in biomass pellet furnaces.

Jan 04, 2022

There are many advantages of biomass boilers. The advantages of biomass boilers have been mentioned above, but there are also disadvantages. Let's compare the advantages and disadvantages of biomass boilers to see if biomass boilers are ideal boilers.

Dec 31, 2021

The SZL boiler is designed according to the biomass solid shaped solid fuel (BBDF). The straw that enters this series of boilers is dried and made into block or rod shape. Therefore, this design adopts the layered combustion method of chain grate, which is suitable for fuel.

Dec 30, 2021

(1) The water pressure test should be carried out when the surrounding air temperature is higher than 5℃, and antifreeze measures must be taken when the temperature is lower than 5℃. The water used in the water pressure test should be kept at a temperature higher than the surrounding dew point to prevent condensation on the surface of the boiler. It is not suitable for the temperature to be too high to prevent vaporization and excessive temperature stress, which is generally 20°C-70°C.

Dec 29, 2021

After the components of the biomass chain grate boiler are installed and checked and commissioned, it is confirmed that the components have safe starting conditions, and the oven can be started. At the end of the oven, cook the oven.

Dec 28, 2021

This article mainly introduces the precautions for the ignition of biomass chain grate boilers. In particular, it is necessary to pay attention to the temperature rise not too fast during the ignition, so as to avoid uneven heating of various components, resulting in excessive stress, which affects the service life of the boiler!