XINLI BOILER

Biomass burner jam processing method

04 Nov, 2021

　　Material jam is a problem often encountered in the process of using biomass burners. This problem is mostly caused by mechanical devices or improper use, and quality problems of bio-particle fuel. Once the burner shows a jam, its combustion rate will drop, resulting in a waste of fuel. Faced with the material jam problem of the biomass pellet burner, we can take the following measures to deal with it.

　　1. Open the feed monitoring port of the biomass burner to check whether the biomass particles are mixed with sundries, ropes, iron wires and other items to prevent sundries from blocking the feeding opening.

　　2. If the biomass pellets are too long, they will block the feeding port, so longer biomass pellets can be crushed, but not crushed too much. The same biomass pellets that are too crushed will also cause jamming or blockage of the burner.

　　3. If there is debris blocking the feeding port, use wooden sticks or other objects to clean up the obstruction, try not to use iron wires or other sharp objects to clean up, avoid getting caught in the screw.

　　When the biomass burner shows material jam or obstruction during the operation process, we should find the cause in time and deal with it according to the correct process to enable the burner to continue to operate.