XINLI BOILER

Which industries can use biomass boilers?

28 Oct, 2021

　　The purpose of the air preheater at the tail of the biomass boiler is to recover the heat of the flue gas, which can improve the efficiency of the biomass boiler. When the gas is sent to the chimney, the temperature is lowered, which simplifies the pipe design. It also controls the temperature of the gas. Generally, the position of the air preheater at the tail of the biomass boiler is at the bottom of the biomass boiler.　　The straight tube package of the biomass boiler is located at the outlet pipe, and the end of each glass tube is open. The hot gas from the biomass boiler will pass through the pipes. One end of the air blower allows air to enter the other end of the pipe, and this hot air is burned by the pipe of the biomass boiler. In this design, the air preheater casing at the end of the entire biomass boiler supports itself to provide the necessary pipe expansion joints.

　　The dust collector inside the biomass boiler is used to recover granular solids or powders, remove pollutants, and discharge the exhaust gas into the atmosphere. Dust removal is a process of collecting dust encountered in any process. The dust collector inside the biomass boiler can be used for single-unit construction, or for the process of separating particulate air. They are usually used as air pollution control equipment to maintain or improve air quality.

　　The settling chamber and baffle chamber of the dust collector inside the biomass boiler are not commonly used. However, their operating principles are usually incorporated into more efficient designs. The settling chamber of the biomass boiler is simple in design and can be made of almost any material. However, they are rarely used mainly as dust collectors inside biomass boilers because of their large space requirements and low efficiency. The actual use is as a pre-cleaner for more efficient biomass boilers.