XINLI BOILER

What are the differences between biomass fuel boilers and gas boilers?

06 Jul, 2021

　　Biomass fuel boiler is a kind of boiler that uses biomass fuel as fuel. Compared with coal-fired boilers, it has the advantages of environmental protection and cleanliness, but biomass fuel is slightly more expensive than coal, about 891 tons. Compared with electricity, gas, gasoline and diesel, it can save 40%-60%. The fuel of the coal-fired boiler design scheme is coal. Biomass fuel boiler design program can use biomass fuel as fuel. Because biomass fuel has much less calorific value in the enterprise volume than coal, and the burning sludge is large. The design scheme of furnace capacity, total combustion area, layout of heated surfaces, and total flow of smoke and dust. .

　　Feeding system software and dust collector equipment are very different from coal-fired boilers. For natural gas boilers, there are some technical standards for the manufacturer and its actual operating staff, and in the case of application, there are some safety risks. Therefore, companies must not only stipulate technicality for professional and technical personnel, but also have some advantages:

　　(1) Large-diameter wave-shaped furnace: the boiler combustion chamber is composed of a large-diameter full wave-shaped furnace. The combustion chamber has a large space, which can make the raw materials evenly burned when heated, and can reasonably digest and absorb thermal deformation, and the radiation source has a large heating surface. .

　　(2) High steam quality: the diameter of the shell is large, the water volume is large, the adaptability to load changes is strong, and the humidity of the steam environment is in the controllable category.

　　(3) Safety Rain time is in the controllable category: the bottom position of the boiler's combustion chamber, the water level line clearly meets the technical specifications of our country, and the specified water level line specifications are strictly followed to ensure the operational safety of the boiler.

　　(4) Multi-purpose safety explosion-proof equipment: explosion-proof equipment connected to the furnace is set up on the control panel of the boiler to avoid the release of high-efficiency energy caused by a moment when the fuel is violently combusted in the furnace, and it can be automatically calibrated.

　　(5) Convenient maintenance in the boiler: Hand holes are set on the top of the boiler, and special hand hole equipment is set up in the middle and lower parts of the front, rear, left, and right ends of the boiler, which is conducive to the maintenance and cleaning of the equipment in the boiler and the bottom of the boiler.